Kitchen_header.JPG top


Read the article on George's Kitchen Knives in the Toronto Star - Feb 7th & correction Feb 14th.2007- You'll have to check the Star's website I haven't transferred it over to this page yet.                               

Kitchen knives - my favourite pastime is eating so I have spent a great deal of time researching kitchen knife patterns in an attempt to make them as friendly as possible to the serious chef or cook.  So far response from the trade has been very positive.  Please take time to look over them carefully and as my favourite chef says "Enjoy"


Unique Knife Block 
$65 
plus applicable tax, ship/handling
**KNIFE  NOT  INCLUDED**
The beauty of this knife block is you are not restricted
to specific size spaces for your knives.  All your knives
regardless of dimension will fit.  Bristle insert allows
you to place numerous knives without difficulty.  Fits George's knives beautifully.


  

Updated Wednesday, December 28, 2011

Click on Images Below to ENLARGE

K1 - KITCHEN KNIFE
(Julienne)
1/8" 440C  Stainless Steel
OAL 7 3/4" Blade 3½"

Black paper micarta handle pinned and epoxied in place 316 S/S pin

K2- KITCHEN KNIFE
(Paring)
1/8" 440C Stainless Steel
OAL 7 3/4" Blade 3½"

Black paper micarta handle pinned and epoxied in place 316 S/S pins

K3- KITCHEN KNIFE
(Vegetable)
1/16" 440C  Stainless Steel
OAL 10" Blade 5¼"

Black paper micarta handle pinned and epoxied in place 316 S/S pins



photo to follow



K33
- KITCHEN KNIFE
6" French Style Chef Knife
1/8" 440C  Stainless Steel
OAL     Blade
Black paper micarta handle pinned and epoxied in place 316 S/S pin



photo to follow



K34
- KITCHEN KNIFE
8" French Style Chef Knife
1/8" 440C  Stainless Steel
OAL   Blade
Black paper micarta handle pinned and epoxied in place 316 S/S pin



photo to follow



K35
- KITCHEN KNIFE
10" French Style Chef Knife
1/8" 440C  Stainless Steel
OAL     Blade
Black paper micarta handle pinned and epoxied in place 316 S/S pin
        George's  Kitchen  Knife  Evolution

Initially the kitchen knives were made with a partial tang and small rounded walnut handle.  George quickly established that the partial tang was not strong enough to with
stand the rigors of kitchen use and the straight round handle uncomfortable.


The next move was to a full tang, still with the small walnut handle only this time with
a slight curve on the end.  The full tang was stronger however the small handle still 
caused hand cramping if used for more than a few minutes.

The knife at the bottom of the photo is the THIRD generation that George makes now. 
It has seen several modifications and improvements.  Of course it has a FULL tang, the
handle is generous in size and very ergonomic.  The fullness in the belly and bulbous
pommel are comfortable for long usage and the pommel allows you to slide to the back
of the handle for chopping.  Another addition is the Devcon 11 epoxy that secures the
handle material to the tang.  It not only ensures the scales stay put but acts as a sealer
to keep moisture from creeping behind the handle scales and causing problems.  The 
pins act strictly as sheer pins.  The Black Paper Micarta used for the handle material
is a manmade product that is impervious to weather changes unlike the walnut and so
long as your knife does not end up in the dishwasher will last for many years to come.


Wooden handles are available for an additional fee as a special order.
We only use high resign Central American wood as it is not as susceptible
to our constant weather changes and will not crack or split over time. 

K4
- KITCHEN KNIFE
(Fillet)
1/16" 440C  Stainless Steel
OAL 13 7/8" Blade 8"

Black paper micarta handle pinned and epoxied in place 316 S/S pins

Photo for comparison
purposes

Fillet and Boning Knife

K16-KITCHEN KNIFE
(Boning)
1/16" 440C Stainless Steel
OAL 11 1/2"     Blade 6 1/4"
Black paper micarta handle pinned and epoxied in place 316 S/S pins
 

ALL
of our 
Kitchen Knife Handles
are epoxied with
Devcon 11 Epoxy
as well as 
being pinned with
316 S/S pins

 


K20-FLUKE FILLETING  KNIFE
 Sheath- leather with partial
kydex liner is SPECIAL ORDER

1/16" 440C  Stainless Steel
OAL          Blade 14"
Black paper micarta handle pinned 
and epoxied in place 316 S/S pins
used specifically for Flounder-
tip slightly rounded

Our sheaths for 
filleting knives for our fishermen on our 
outdoor page are
now leather with
Kydex liners.

Filleting knives in
our kitchen line 
DO  NOT  come with
sheaths.
 

K6- KITCHEN KNIFE
(Large Chef)
Our Pride & Joy will perform 80% of your kitchen work
1/8" 440C  Stainless Steel
OAL 14" Blade 9½"

Black paper micarta handle pinned and epoxied in place 316 S/S pins

K6- (Large Chef)Top
K14 (Chinese Cleaver)Bottom
photo for comparison

The Chinese Cleaver combines features of our K6 with a curved cutting edge found in Oriental vegetable preparation.   The long curved edge makes slicing, dicing and chopping easier.

K14-KITCHEN  KNIFE
(Chinese Cleaver)

1/8" 440C  Stainless Steel
OAL         Blade
The heal of the blade is rounded up, unlike the K6 for a continuous rocking motion, and is slightly shorter in the blade.
Black paper micarta handle pinned & epoxied in place316 S/S pins
 
"Ethnic   Specialty   Knives"
These knives have very specific uses and are made in limited quantity.  These Kosher slaughtering knives and Bris knives are very popular with those who use them.
We do make custom order Kitchen Knives by putting distinguishing liners behind the
handle scales, i.e.  white/black/white for "Dairy", red/white/red for "Beef/meat" etc.
Keep your Kitchen working knives separate by colour code.  See sample below


440C, Rc 56-58, Mirror polished, Brass Bolsters, Black Micarta
Handles, pinned with brass pins, and epoxied with Devcon 11

K21-BEEF SLAUGHTERING KNIFE

K22-VEAL SLAUGHTERING KNIFE K23-CHICKEN SLAUGHTERING KNIFE

Special Cases
photos to follow
Hand stitched leather
with velcro closing

Special Cases
photos to follow
Hand stitched leather
with velcro closing

Special Cases
photos to follow
Hand stitched leather
with velcro closing


K24-
LARGE BRIS - INTEGRAL

Sample of handle with
coloured liners for the regular
Kitchen Knives
Available options: red/white/red
white/black/white 

K25-SMALL BRIS - INTEGRAL

photos to follow







photos to follow


K26-
SUSHI  KNIFE



photos to follow


K27-
SUSHI  "KIT"


photos to follow


K28-
STEAK KNIFE
1/16" 440C  Stainless Steel
Black paper micarta handle pinned and epoxied in place 316 S/S pins
 
See below for Diamond Steels, Magnetic Boards, Chopping Blocks

K18-KITCHEN KNIFE
(Santoku)
1/8" 440C  Stainless Steel
OAL 12 3/4"  Blade 7 1/2"
Depth 2 1/4"
Black paper micarta handle pinned
and epoxied in place 316L S/S pins

K5 KITCHEN  KNIFE
(Small Butcher)
1/8" 440C  Stainless Steel
OAL 13" Blade 8 5/8"

Black paper micarta handle pinned and epoxied in place 316 S/S pins

K7- KITCHEN KNIFE
(Large Butcher)
3/16" 440C Stainless Steel
OAL 15 3/4" Blade 10 5/8"

Black paper micarta handle pinned and epoxied in place 316 S/S pins

K19-KITCHEN  KNIFE
(Bread Knife)
Left handed - special order
1/16" 440C Stainless Steel
OAL 15 3/4"  Blade 10 1/2"
Teeth Individually hand filed
Black paper Micarta Handle pinned
& epoxied in place 316L S/S pins

K21-KITCHEN  KNIVES
(Integral Steak Knives)
Sculpted from 
1/4" 440C Stainless Steel
OAL 8" Blade 3 3/4" 5/8" depth
Mirror Polished-sold individually
or in a set

K15- KITCHEN  KNIFE
(Sheep Skinner)
(Meat Packing/All Purpose)
1/8" 440C  Stainless Steel
OAL 10 1/2"  Blade 5 3/4"
Black paper Micarta Handle pinned & epoxied in place 316L S/S pins
 
 

K8- DOMESTIC  CARVER 
(Larger Commercial Carver
Available )

Domestic Carver slightly shorter
1/8" 440C Stainless Steel,
OAL 16¼" Blade 11½"

Black paper micarta handle pinned and epoxied in place 316 S/S pins

K13-TWO CHICKEN FORK
(Kitchen/Carving)
440C  Stainless Steel
Extra Long Tines
Black paper Micarta Handle pinned & epoxied in place 316 S/S pins

- K9-KITCHEN FORK
(BBQ)
440C  Stainless Steel
OAL 15½"

Black paper micarta handle pinned and epoxied in place 316 S/S pins

-K10 STAG HANDLED CARVING SET-( Brass Guards)
1/8" 440C  Stainless Steel
OAL 12½" Blade 7½"
 
Brass guards hand ground
Stag handles pinned and epoxied in place with brass pins.

K17 STAG HANDLED CARVING SET-( 416S/S Guards)
1/8" 440C  Stainless Steel
OAL 12½" Blade 7½"
 
416 S/S guards hand ground.
It is a perfect colour match for 440C-low maintenance unlike brass.
Stag handles pinned and epoxied in place with 316 S/S pins.
K11COMMERCIAL CARVING SET
Consists of a K8 knife & fork

We are currently selling this set with the TWO CHICKEN FORK
Photo will be changed soon
BBQ fork is optional.

 
 

 

 


K12 Representative of a
KITCHEN  SET - Kitchen Sets
can have as many or as few Knives as you would like.
We all have our favourite 
knives for various jobs so we
are set up so that you can mix
and match to create the perfect set for yourself.  


ALL  ITEMS  MAY  BE
PURCHASED  INDIVIDUALLY
All   OF  OUR  STOCK  IS
NOT  REPRESENTED  IN  THIS
PHOTO
 

 


K29-
LARGE  DIAMOND  STEEL

 


K30-
SMALL POCKET DIAMOND  STONES



photo to follow



K32-
DMT  WET STONE 1200GRIT
c/w Wooden Storage Box
  K31-MAGNETIC  STRIP BOARDS

photos to follow

Price changes with each shipment
so check for pricing at time of order

 
All of our wooden chopping boards are hand crafted by a Gentleman in Toronto-Canada.  They are beautiful testaments to "Old World Charm"  Crafted with love and skill these boards will make a wonderful addition to any kitchen.  Each board is unique in pattern, items shipped may not be exactly as shown on site, although I am trying to have a specific model made up just for us.  The boards feature North American and Exotic woods such as Maples, Cherry, Walnut, Oak, and Purple Heart.
**NOTE: This wood is heavy** Ask for details and availability
Hope to have photographs up in the near future

GO TOP

 

Hit Counter